[Woodcarver] Complete bear mask photos posted

[Alex Bisso]

I just posted some photos of my finished bear mask carving on my picturetrail "Carvings" album.  The first photo include a discription of the painting and finish that was used.  If you care to see it, the link to my albums site is":
http://www.picturetrail.com/gallery/view?username=abisso&x=15&y=10

I have been using the Watco finishing wax with good results but I am not please with the fact that it is so liquid (must contain a solvent) and does not dry in a reasonable amount of time.  Even a very thin, wiped down coat takes quite a while to dry to the point where it can be buffed (much longer than it says on the can to allow).  If any one else is using a different finishing wax or has experience with several of them and has a preference, I would like to know of some recommended options to to the Watco.

ALEX 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20060312/bee0b305/attachment.html