[Woodcarver] Detailing in end grain

[Doug Evans]

Merryl, 
 
If your V tool is truly sharp you should have this trouble. First be
sure the tool is a s sharp as can be . Quality doesn't matter but sharp
sure does !!! Try also to take smaller "bites" into the wood make a few
passes versus one big one. If you still have trouble, yes use some super
glue let it dry and go back after that end grain.
 
Good luck !!!
 
Doug Evans
 
 
 
 
I know my V tool isn't the best quality, but it is sharp. I'm having 
difficulty detailing hair in the end grain of a small caricature. The 
cuts tear out real easy. Should I "harden" the wood first(basswood) or 
are there other secrets you could share?

Merryl Bustin
Novice carver
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20060506/2bb3c71b/attachment.htm