[Woodcarver] Detailing in end grain

[Ralph Scheffler]

Merryl -
    My suggestion would be to soak your basswood in water for about 15 minutes.  I find when my wood has dried out (we live in the desert) I need to add moisture to the wood.  Another problem you must watch though, be sure to oil down your blades after carving to avoid rust build-up.  

Ralph Scheffler
Palm Desert, CA
  ----- Original Message ----- 
  From: Merryl Bustin 
  To: [Woodcarver] 
  Sent: Saturday, May 06, 2006 1:15 PM
  Subject: [Woodcarver] Detailing in end grain


  DONATIONS to the Woodcarver Mailing List can be made using PayPal OR regular mail. Click this link: http://wwwoodcarver.com/WWWList/WWWList.html



------------------------------------------------------------------------------


  I know my V tool isn't the best quality, but it is sharp. I'm having 
  difficulty detailing hair in the end grain of a small caricature. The 
  cuts tear out real easy. Should I "harden" the wood first(basswood) or 
  are there other secrets you could share?

  Merryl Bustin
  Novice carver



------------------------------------------------------------------------------


  _______________________________________________
  Woodcarver mailing list
  Woodcarver at six.pairlist.net
  http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20060506/0e586aee/attachment.html