[Woodcarver] Casting & Finishes

[Tom Buggey]

Thank you all. I never thought of Yahoo groups. As for the two sided coins,
I was hoping to do two separate molds and join them. I will see if that is
possible.

Thanks again,
Tom


> From: Victor Hamburger <VHamburg at bellatlantic.net>



> 

> Sealing the carving with a clear finish.  Several have already mentioned the

> water based polys.  Use multiple coats, with a careful light sanding/cleaning

> between coats.  The final coat should go on smoothly and seal the wood

> completely for you.

> 

> Good luck with it! Vic H

>