[Woodcarver] Wednesday Woodcarver Chat

[Peter Barrow]

On 9 Mar 2007, at 20:23, Peter Barrow wrote:


> Support our List with a donation: http://wwwoodcarver.com/WWWList/ 

> WWWList.html

> Visit our List Photo Gallery at: http://woodcarver.smugmug.com/

> Submit photos to our List Photo Gallery: http:// 

> www.wwwoodcarver.com/Smugmug/SmugmugGallery.html

>

>

> On 8 Mar 2007, at 00:37, terry nees wrote:

>

>> Support our List with a donation: http://wwwoodcarver.com/WWWList/ 

>> WWWList.html

>> Visit our List Photo Gallery at: http://woodcarver.smugmug.com/

>> Submit photos to our List Photo Gallery: http:// 

>> www.wwwoodcarver.com/Smugmug/SmugmugGallery.html

>>

>> Hi Rollie,  I'm afraid I can't answer your ?, but what have you  

>> got to lose.  At worst, you may have some decorative kindling but  

>> I know you'll learn a lot.  IMHO

>> Terry Nees  Msgt of Marines (Ret)

>>

>> ----- Original Message -----

>> From: Roland Surette

>> To: [Woodcarver]

>> Sent: Wednesday, March 07, 2007 03:50 PM

>> Subject: Re: [Woodcarver] Wednesday Woodcarver Chat

>>

>> Support our List with a donation: http://wwwoodcarver.com/WWWList/ 

>> WWWList.html

>> Visit our List Photo Gallery at: http://woodcarver.smugmug.com/

>> Submit photos to our List Photo Gallery: http:// 

>> www.wwwoodcarver.com/Smugmug/SmugmugGallery.html

>>

>>

>>

>> Hi all,

>>

>> I'm new to this and still learning. Have a question for anyone who  

>> would care to respond. I'm getting ready to start a relief  

>> carving. The plans suggested I use white birch but I was unable to  

>> get it. I purchased and made my panel out of yellow birch. So far  

>> all I have done is use the router to get a few of the depths  

>> right. Haven't started to use the chisels yet. What do you think?  

>> Is it worthwile to try and finish it off or not. I know that this  

>> is a pretty hard-wood. Any opinions on if I should try to continue  

>> or not? I realize that I should of probably attempted something  

>> more simple with a chunk of basswood to start but what the heck, I  

>> just dove in. Did I bite off more than I can chew here or what?

>>

>> Woodhawk Rollie

>>

>>

>>

>> On 3/7/07, Marcia Berkall <whitwood at fairpoint.net> wrote:

>> Support our List with a donation: http://wwwoodcarver.com/WWWList/ 

>> WWWList.html

>> Visit our List Photo Gallery at: http://woodcarver.smugmug.com/

>> Submit photos to our List Photo Gallery: http:// 

>> www.wwwoodcarver.com/Smugmug/SmugmugGallery.html

>>

>>

>>

>> Join in on the fun!!!

>> For informative and fun REAL TIME conversations with a number of the

>> carvers on "The List", come to the Woodcarver chats.  We don't always

>> talk about carving, but if anyone has a question or comment, we  

>> can get

>> serious in a hurry.  Get to know the people behind the names.  And  

>> bring

>> you carving questions with you!!!

>>

>> We meet on Wednesday nights at 9:30 PM Eastern and on Sundays at 4:30

>> PM Eastern.

>>

>> If you are NOT using an IRC chat program, I think you will like these

>> simplified instructions!!!  Just click on the link below...will take

>> you directly to #Woodcarverchat

>>

>>

>> http://www.starlink-irc.org/java/java_williamslake.html? 

>> chan=#Woodcarverchat

>>

>>

>> This may take a LONG time to load!!!!!!!  Don't give up.  When it

>> finally does load, you will be asked to type in a nickname.....then

>> click connect, and wait a little bit longer. The chat screen will

>> open.  Type something in the narrow horizontal space just below the

>> chat screen and hit you enter key.  Nothing to it! :)

>>

>> If you are using WebTV or still have trouble getting there, one of

>> these links will work...we just save them as a last resort in case

>> all other links don't work

>> http://webchat.starlink-irc.org/cgi-bin/irc.cgi   or

>> http://stopover.ky.us.starlink-irc.org/cgi-bin/irc.cgi  Where is

>> says, "channel", type in

>> #woodcarverchat (don't forget the #).

>>

>> *******

>>

>> If you are using an mIRC chat program:

>>   1. Log onto your ISP.

>>   2. Open mIRC. You should see a box "mIRC Options". If you don't

>> then click on View then on "Options"  Fill in the information

>> there...you do NOT have to put in your real name or email

>> address.  For security purposes, make them up.  Do put in the

>> nickname you want and an alternative.

>>   4. Click on the button with the sunburst icon, just to the right

>> of the button that says, "Connect to Server".  Where it says "IRC

>> Network", scroll down until you see "Starlink-IRC" and highlight that

>> so it shows in the window.  There is also a Starlink network, so make

>> sure that the one you select has the "IRC" after it. Now click on the

>> arrow next to the IRC server window.  That will list a number of

>> Starlink-IRC servers....select one of them. The Starlink-IRC random

>> server will automatically pick one of the servers for you, so you can

>> use that one.  With one of the Starlink-IRC servers in the window,  

>> click on

>> "Connect to Server"

>>

>> If the Starlink Random Server is not in your mirc program you can  

>> add it:

>> Click the "add" button.

>> Where it says "Description" type "Starlink Random Server"

>> Where it says "IRC Server" type IRC.STARLINK-IRC.ORG

>> Port should be 6664,6665,6666,6667,6668,6669   (all of those with no

>> spaces between them)

>> and "Group" is Starlink-IRC

>>   5. Once connected, you'll see lots of scrolling text.  When that

>> stops, type

>>        /join #Woodcarverchat in the window at the bottom and hit

>> your "enter" key.

>>     (you need the / and #, and Woodcarverchat must be spelled  

>> exactly right)

>>

>> *******

>>

>>

>> See you there!

>> E-mail me off the list for additional information and instructions.

>>

>> Marcia Berkall             or              Jack Royer

>> whitwood at fairpoint.net                     jdeuell at reinbeck.net

>>

>>

>>

>> See Marcia's wood carvings

>> at:

>>

>> http://www.pivot.net/~whitwood

>>

>> http://community.webshots.com/user/cahvah

>> *****

>> Affordable Web Page

>> Design:

>> http://artwebmaine.com

>>

>> *****

>>

>> Get 20% Off CoffeeCup Web Design Software

>> Use this code when you checkout: 226STS

>> www.getcoffeecup.com

>>

>> _______________________________________________

>> Woodcarver mailing list

>> Woodcarver at six.pairlist.net

>> http://six.pairlist.net/mailman/listinfo/woodcarver

>>

>>

>>

>> _______________________________________________

>> Woodcarver mailing list

>> Woodcarver at six.pairlist.net

>> http://six.pairlist.net/mailman/listinfo/woodcarver

>> _______________________________________________

>> Woodcarver mailing list

>> Woodcarver at six.pairlist.net

>> http://six.pairlist.net/mailman/listinfo/woodcarver

>

> _______________________________________________

> Woodcarver mailing list

> Woodcarver at six.pairlist.net

> http://six.pairlist.net/mailman/listinfo/woodcarver


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20070309/273f77b3/attachment.htm