[Woodcarver] Wednesday Woodcarver Chat

[Peter Barrow]

On 9 Mar 2007, at 20:29, Peter Barrow wrote:


> Support our List with a donation: http://wwwoodcarver.com/WWWList/ 

> WWWList.html

> Visit our List Photo Gallery at: http://woodcarver.smugmug.com/

> Submit photos to our List Photo Gallery: http:// 

> www.wwwoodcarver.com/Smugmug/SmugmugGallery.html

>

>

> On 9 Mar 2007, at 20:23, Peter Barrow wrote:

>

>> Support our List with a donation: http://wwwoodcarver.com/WWWList/ 

>> WWWList.html

>> Visit our List Photo Gallery at: http://woodcarver.smugmug.com/

>> Submit photos to our List Photo Gallery: http:// 

>> www.wwwoodcarver.com/Smugmug/SmugmugGallery.html

>>

>>

>> On 8 Mar 2007, at 00:37, terry nees wrote:

>>

>>> Support our List with a donation: http://wwwoodcarver.com/WWWList/ 

>>> WWWList.html

>>> Visit our List Photo Gallery at: http://woodcarver.smugmug.com/

>>> Submit photos to our List Photo Gallery: http:// 

>>> www.wwwoodcarver.com/Smugmug/SmugmugGallery.html

>>>

>>> Hi Rollie,  I'm afraid I can't answer your ?, but what have you  

>>> got to lose.  At worst, you may have some decorative kindling but  

>>> I know you'll learn a lot.  IMHO

>>> Terry Nees  Msgt of Marines (Ret)

>>>

>>> ----- Original Message -----

>>> From: Roland Surette

>>> To: [Woodcarver]

>>> Sent: Wednesday, March 07, 2007 03:50 PM

>>> Subject: Re: [Woodcarver] Wednesday Woodcarver Chat

>>>

>>> Support our List with a donation: http://wwwoodcarver.com/WWWList/ 

>>> WWWList.html

>>> Visit our List Photo Gallery at: http://woodcarver.smugmug.com/

>>> Submit photos to our List Photo Gallery: http:// 

>>> www.wwwoodcarver.com/Smugmug/SmugmugGallery.html

>>>

>>>

>>>

>>> Hi all,

>>>

>>> I'm new to this and still learning. Have a question for anyone  

>>> who would care to respond. I'm getting ready to start a relief  

>>> carving. The plans suggested I use white birch but I was unable  

>>> to get it. I purchased and made my panel out of yellow birch. So  

>>> far all I have done is use the router to get a few of the depths  

>>> right. Haven't started to use the chisels yet. What do you think?  

>>> Is it worthwile to try and finish it off or not. I know that this  

>>> is a pretty hard-wood. Any opinions on if I should try to  

>>> continue or not? I realize that I should of probably attempted  

>>> something more simple with a chunk of basswood to start but what  

>>> the heck, I just dove in. Did I bite off more than I can chew  

>>> here or what?

>>>

>>> Woodhawk Rollie

>>>

>>>

>>>

>>> On 3/7/07, Marcia Berkall <whitwood at fairpoint.net> wrote:

>>> Support our List with a donation: http://wwwoodcarver.com/WWWList/ 

>>> WWWList.html

>>> Visit our List Photo Gallery at: http://woodcarver.smugmug.com/

>>> Submit photos to our List Photo Gallery: http:// 

>>> www.wwwoodcarver.com/Smugmug/SmugmugGallery.html

>>>

>>>

>>>

>>> Join in on the fun!!!

>>> For informative and fun REAL TIME conversations with a number of the

>>> carvers on "The List", come to the Woodcarver chats.  We don't  

>>> always

>>> talk about carving, but if anyone has a question or comment, we  

>>> can get

>>> serious in a hurry.  Get to know the people behind the names.   

>>> And bring

>>> you carving questions with you!!!

>>>

>>> We meet on Wednesday nights at 9:30 PM Eastern and on Sundays at  

>>> 4:30

>>> PM Eastern.

>>>

>>> If you are NOT using an IRC chat program, I think you will like  

>>> these

>>> simplified instructions!!!  Just click on the link below...will take

>>> you directly to #Woodcarverchat

>>>

>>>

>>> http://www.starlink-irc.org/java/java_williamslake.html? 

>>> chan=#Woodcarverchat

>>>

>>>

>>> This may take a LONG time to load!!!!!!!  Don't give up.  When it

>>> finally does load, you will be asked to type in a nickname.....then

>>> click connect, and wait a little bit longer. The chat screen will

>>> open.  Type something in the narrow horizontal space just below the

>>> chat screen and hit you enter key.  Nothing to it! :)

>>>

>>> If you are using WebTV or still have trouble getting there, one of

>>> these links will work...we just save them as a last resort in case

>>> all other links don't work

>>> http://webchat.starlink-irc.org/cgi-bin/irc.cgi   or

>>> http://stopover.ky.us.starlink-irc.org/cgi-bin/irc.cgi  Where is

>>> says, "channel", type in

>>> #woodcarverchat (don't forget the #).

>>>

>>> *******

>>>

>>> If you are using an mIRC chat program:

>>>   1. Log onto your ISP.

>>>   2. Open mIRC. You should see a box "mIRC Options". If you don't

>>> then click on View then on "Options"  Fill in the information

>>> there...you do NOT have to put in your real name or email

>>> address.  For security purposes, make them up.  Do put in the

>>> nickname you want and an alternative.

>>>   4. Click on the button with the sunburst icon, just to the right

>>> of the button that says, "Connect to Server".  Where it says "IRC

>>> Network", scroll down until you see "Starlink-IRC" and highlight  

>>> that

>>> so it shows in the window.  There is also a Starlink network, so  

>>> make

>>> sure that the one you select has the "IRC" after it. Now click on  

>>> the

>>> arrow next to the IRC server window.  That will list a number of

>>> Starlink-IRC servers....select one of them. The Starlink-IRC random

>>> server will automatically pick one of the servers for you, so you  

>>> can

>>> use that one.  With one of the Starlink-IRC servers in the  

>>> window, click on

>>> "Connect to Server"

>>>

>>> If the Starlink Random Server is not in your mirc program you can  

>>> add it:

>>> Click the "add" button.

>>> Where it says "Description" type "Starlink Random Server"

>>> Where it says "IRC Server" type IRC.STARLINK-IRC.ORG

>>> Port should be 6664,6665,6666,6667,6668,6669   (all of those with no

>>> spaces between them)

>>> and "Group" is Starlink-IRC

>>>   5. Once connected, you'll see lots of scrolling text.  When that

>>> stops, type

>>>        /join #Woodcarverchat in the window at the bottom and hit

>>> your "enter" key.

>>>     (you need the / and #, and Woodcarverchat must be spelled  

>>> exactly right)

>>>

>>> *******

>>>

>>>

>>> See you there!

>>> E-mail me off the list for additional information and instructions.

>>>

>>> Marcia Berkall             or              Jack Royer

>>> whitwood at fairpoint.net                     jdeuell at reinbeck.net

>>>

>>>

>>>

>>> See Marcia's wood carvings

>>> at:

>>>

>>> http://www.pivot.net/~whitwood

>>>

>>> http://community.webshots.com/user/cahvah

>>> *****

>>> Affordable Web Page

>>> Design:

>>> http://artwebmaine.com

>>>

>>> *****

>>>

>>> Get 20% Off CoffeeCup Web Design Software

>>> Use this code when you checkout: 226STS

>>> www.getcoffeecup.com

>>>

>>> _______________________________________________

>>> Woodcarver mailing list

>>> Woodcarver at six.pairlist.net

>>> http://six.pairlist.net/mailman/listinfo/woodcarver

>>>

>>>

>>>

>>> _______________________________________________

>>> Woodcarver mailing list

>>> Woodcarver at six.pairlist.net

>>> http://six.pairlist.net/mailman/listinfo/woodcarver

>>> _______________________________________________

>>> Woodcarver mailing list

>>> Woodcarver at six.pairlist.net

>>> http://six.pairlist.net/mailman/listinfo/woodcarver

>>

>> _______________________________________________

>> Woodcarver mailing list

>> Woodcarver at six.pairlist.net

>> http://six.pairlist.net/mailman/listinfo/woodcarver

>

> _______________________________________________

> Woodcarver mailing list

> Woodcarver at six.pairlist.net

> http://six.pairlist.net/mailman/listinfo/woodcarver


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20070309/c2fb95bf/attachment.html