[Woodcarver] Laminating boards

[Linehan718 at aol.com]

This is where your workshop and abilities show their true colors.   Before 
beginning you must take the time to pick the perfect boards out, you  don't say 
what wood so generally you want the exact color and grain match as  possible. 
when laminating the boards need to be planed exactly flat. Glue is  liberally 
applied and then using a whole lot of clamps, you apply as much  pressure as 
possible, until nearly all the glue is squeezed out.  If this  is all done 
correctly you will barely notice a join line, and then again you  will notice it 
because you know its there but no one else really will.  
 
 
Maura Carving in NYC
_www.carvinginnyc.com_ (http://www.carvinginnyc.com/) 






************************************** See what's new at http://www.aol.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/woodcarver/attachments/20071109/8a1d1f4c/attachment.htm>