[Woodcarver] Light plate switches

[kate hollandsworth]

Thank you, Marilyn and Arthur, for your help.  I had already figured out
that the switch hole and outlet holes on the plates needed to be exaggerated
holes.  I will use a router to make holes a bit bigger but leave a thin
piece of the wood at the bottom of the hole so it looks more normal.  I am
using a band saw to cut the thicker pieces of wood I have to a manageable
thickness.  But I wasn't sure how thick the wood could/should be.  Would
like to use a variety of wood throughout the house.  Starting with easier
flat incised or recessed carvings on store-bought wooden plates and
graduating up to relief carving later as it goes.  I can always give the
first ones as little gifts.   kate

 

  _____  

From: woodcarver-bounces at carverscompanion.com
[mailto:woodcarver-bounces at carverscompanion.com] On Behalf Of Marilyn
Osterhouse
Sent: Sunday, April 05, 2009 7:05 AM
To: '[Woodcarver]'
Subject: Re: [Woodcarver] Light plate switches

 

No more than <"

 

 

 

Marilyn

Marilyn.Osterhouse at Comcast.net <mailto:mosterhouse at sbcglobal.net> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/woodcarver/attachments/20090405/a1c5c809/attachment.html>