[Woodcarver] finish

[Charley]

Thanks for all the input  I had never used tung oil before. I use tru oil for this kind of carveing. I never thought about mixing with Danish oil. Will try that on the roadrunner I'm working on now.  Trying curly maple... wow  even with power it's hard wood....
thanks again   think I'll try some tru oil on it. I'm afraid of brakeing it if I buff to hard.  thanks to  everyone who helped me out. Thats why this list is the BEST...
 Charley 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/woodcarver/attachments/20090418/6c566301/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 17713 bytes
Desc: not available
Url : <http://six.pairlist.net/pipermail/woodcarver/attachments/20090418/6c566301/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2353 bytes
Desc: not available
Url : <http://six.pairlist.net/pipermail/woodcarver/attachments/20090418/6c566301/attachment-0001.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 19081 bytes
Desc: not available
Url : <http://six.pairlist.net/pipermail/woodcarver/attachments/20090418/6c566301/attachment-0002.jpe>