[Woodcarver] finish

[Charley]

Thanks for all the input  I had never used tung oil before. I use tru oil for this kind of carveing. I never thought about mixing with Danish oil. Will try that on the roadrunner I'm working on now.  Trying curly maple... wow  even with power it's hard wodd....
thanks again
 Charley 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/woodcarver/attachments/20090417/3e969e35/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 17713 bytes
Desc: not available
Url : <http://six.pairlist.net/pipermail/woodcarver/attachments/20090417/3e969e35/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2353 bytes
Desc: not available
Url : <http://six.pairlist.net/pipermail/woodcarver/attachments/20090417/3e969e35/attachment-0001.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 19081 bytes
Desc: not available
Url : <http://six.pairlist.net/pipermail/woodcarver/attachments/20090417/3e969e35/attachment-0002.jpe>