[Woodcarver] wood questions

[kpollak at comcast.net]

Hi Merrilee, 

Yes you can stain or color or both anything that you like before you put the wood hardner on.  It just can't be touched up afterwards if the sign starts to fade a little. 

Karen (aka spit) 
----- Original Message ----- 
From: "Merrilee Johnson" <merrihat at hotmail.com> 
To: woodcarver at carverscompanion.com 
Sent: Tuesday, June 30, 2009 1:26:24 PM GMT -08:00 US/Canada Pacific 
Subject: Re: [Woodcarver] wood questions 

Friends in Carving: Please support our List - visit carverscompanion.com/List/Support.html to donate. 
Hi Karen, 
   Could you put the finish (paint - stain- etc) on first (after the carving is finished that is) then put the wood hardner on?  I just saw that at the hardware store.  Funny that you mentioned it :) 
Thanks for your imput! 
Merrilee 
  

~~~~~~~~~~~~~~~~~~~~~~~~~ 
when your done with the carving you seal the wood with wood hardner it should last a very long time. I have used it on many items I have turned that have had termite damage, wormholes,etc only downside is that you are stuck with is that nothing will go over the top of wood hardner or none that I know of. Karen (spit) 



Lauren found her dream laptop. Find the PC that’s right for you. 
_______________________________________________ Woodcarver mailing list Woodcarver at carverscompanion.com http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/woodcarver/attachments/20090630/1fec2870/attachment.htm>