[Woodcarver] re: help

[Bill Smith]

hi irwin:

have u tried not cutting the blank completely out
leave at the blank almost cut out but not totally to u
get where u have cut both sides out n when u have
finally cut the two peiced on both sides one side will
be then be cut then go back to the other n cut that
part off now u should have a better lookin cut out..
Also make sure the wood is flat not tilted.

Bill
--- irwin reisman <wittler60 at earthlink.net> wrote:

> To make a DONATION to the Mailing List using PayPal
> OR regular mail, click this link:
> http://wwwoodcarver.com/WWWList/WWWList.html
> 
> > i recently joined a wood shop where i live!! they
> have every tool you can think of,so i decided to try
> to cut my own blanks.I have tried
> tape,addhesive,make sure i put on at least 2 sides
> when one side is done i use masking tape and then do
> the front..... Buty no matter what i do it does not
> come out like blanks i buy.....i am using bass wood
> the top of the line band saw. Anybody got any
> suggestions that might help?
> > _______________________________________________
> Woodcarver mailing list
> Woodcarver at six.pairlist.net
> http://six.pairlist.net/mailman/listinfo/woodcarver



		
__________________________________
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
http://mobile.yahoo.com/maildemo