[Woodcarver] hi gang maybe somneone can answer this for me

[George Farrell]

Hi Bill
   If there is an adjustment on the top wheel for tilt, then it has come
loose so that the plane of the top wheel is no longer parallel with the
plane of the lower.  The plane of each wheel should be in the plane of 
the
other.  This can be tested by laying a straight edge from the top of the
upper to the bottom of the lower.  You probably need to remove the 
table to do
this.  OR take a straight board that's long enough and add bump outs to 
it
to go around the table.

On Jan 16, 2005, at 11:02 PM, Bill Smith wrote:
> anyone have an idea what could be wrong with my band
> saw its a sears 12". I do not have the book for it and
> the blades keep comin off the wheels when I start it
> up even with a new blade. The top wheel will wobble
> when touched what does one need to do to fix this
> problem so that I can use the band saw


Happiness is a tall boat and breeze to fill her sails
Have a good day
http://none332.home.mchsi.com
George
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 1023 bytes
Desc: not available
Url : http://six.pairlist.net/pipermail/woodcarver/attachments/20050117/d67f6815/attachment.bin