[Woodcarver] tools?

[Linehan718 at aol.com]

In a message dated 3/19/2007 9:24:27 AM Eastern Standard Time,  
wyndysim at graceba.net writes:

Things seem a little slow, so I have a question.   When the design is finally 
finished for the sign I’ve been commissioned to do,  what tools (not power 
tools) would you suggest I get?  The sign will be  about 4’x 6’.

well,  not knowing exactly what your project is and what tools you  have 
available, I will rely on my own experience with large  signs.    draw out your 
design.  use a plunge router to get  your sign down to proper depths and the use 
hand tools (or power) to round over  and sculpt to form.

 
 
Maura carvin' in  nyc
www.CarvinginNYC.com
http://www.picturetrail.com/carvinginnyc





************************************** AOL now offers free email to everyone. 
 Find out more about what's free from AOL at http://www.aol.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/woodcarver/attachments/20070319/825df8a1/attachment.html>